Over 25 years of experiance with Products, Installation and extensive Off-Road Travel

All wrapped up in a mobile Installation service!

Water Tanks & Bladders

A.I.S have a wide range of water tanks and bladders available and can solve your water carry requirments.
 

New Design 58Lt Rectangular Universal Poly Water Tank with recessed outlets for optional mounting in Vertical or Flat Position. Now with brass outlet. Requires separate filler kit.

This tank comes with nutserts intstalled. These are not designed to hold the full weight of the tank but can assist in stabilising (stoping the tank from sliding). It is always recomended to support the tank with metal straps using the indents.

Height:235.0 mm
Width:840.0 mm
Depth:345.0 mm

 


 

Poly Water Tank 120 Lt Universal Rectangle

 

Height:355.0 mm
Width:500.0 mm
Depth:810.0 mm

 


 

Poly Water Tank 40 Lt Footwell with recess to suit most modern 4WD Wagons & Utes, and two 1/2" BSP brass outlets

Dimensions: 1200mm wide x 190mm high ( 30mm for cap) & 250mm Deep.

The transmission tunnel recess is 420mm wide at the base tapering to 200mm wide at top of recess, and is 110mm high.

The cut-out for centre consoles is 200mm wide and 60mm deep.

Two Brass outlets are fitted (one at each end) and uses 1/2" BSPT thread to allow normal hardware plumbing fittings to be used for custom hose or pump kits.

Height:220.0 mm
Width:1200.0 mm
Depth:250.0 mm

 

 


 

Poly Water Tank 40Lt cube tank (Similar shape to 2 x 20Lt Jerry Cans)

Height:330.0 mm
Width:330.0 mm
Depth:460.0 mm

 


 

Poly Water Tank 40 Lt Under Tray Body including metal brackets

This tank is supplied with nut inserts fitted and 2 x universal mounting plates.

The outlet tap can be fitted for either LH or RH mounting.

Screw on cap provided or can be extended using standard hose or fittings (not included in basic kit)

Height:400.0 mm
Width:270.0 mm
Depth:550.0 mm

 

 


 

New Design 45 Lt Poly Water Tank can be fitted in Vertical or Flat Position. Now with brass outlet Requires filler kit.

This tank comes with nutserts intstalled. These are not designed to hold the full weight of the tank but can assist in stabilising (stoping the tank from sliding). It is always recomended to support the tank with metal straps using the indents and holes.

Filler sold seperately.

Height:90.0 mm
Width:1090.0 mm
Depth:580.0 mm

 

 


 

Poly Water Tank 42 Lt Vertical with wheel arch cut-outs. 1/2" BSP brass outlet TEMPORARILY OUT OF STOCK

Dimensions: 1295mm wide x 600mm high ( 30mm for cap) 75mm thick. The cutout each side is 200mm wide x 300mm high. An additional small rebate contains the brass outlet.

Brass outlet uses 1/2" BSPT thread to allow normal hardware plumbing fittings to be used for custom hose or pump kits.

Height:80.0 mm
Width:620.0 mm
Depth:1300.0 mm

 

 


 

Poly Water Tank 50 Lt Taper Rectangular Universal for Behind Seats etc. 1/2'' BSP brass outlet

Dimensions: 1000mm wide x 350mm high ( 30mm for cap). Depth varies from 200mm at the base to 150mm at the top.

Brass outlet uses 1/2" BSPT thread to allow normal hardware plumbing fittings to be used for custom hose or pump kits.

Height:350.0 mm
Width:200.0 mm
Depth:1000.0 mm

 

 


 

Poly Water Tank 55 Lt Ute or Roof Rack Mounting

Height:320.0 mm
Width:190.0 mm
Depth:1130.0 mm

 


 

Poly Water Tank 80 Lt Flat Under Ute or Truck Tray Mount

The filler uses a 1.5" BSP thread with an adjacent 1/2" BSP insert to attach a fast fill breather line if necessary. Two 1/2" BSP outlets are fitted on the bottom to give a choice of exit to the tap or plumbing system.

Dimensions: 805W x 1070L mm

Height: Tank - 110mm, Inlet position - 170mm, outlet position - 140mm

 


 

 

We Also have a range of water Taps, fittings, Fillers, hose, Pumps & Hot Water Systems.


 

59 Litres Water Tank

 

"Jayco" brand. Has 1/2" barb at wedge end and 25mm "T" barb on same end. One outlet with screw cap. .

Measures 950(L) x 470(W) x 180(H)mm


 

54 Litres Water Tank

 

Rectangular tank. Has 2 x 1/2" barbs on one end diagonally opposite each other with a 25mm barb connector on the same end.

Measures 750(L) x 350(W) x 220(H)mm


 

90 Litres Water Tank

 

Narrow rectangular tank. Has 1/2" right angle barb at one end and 1" three way outlet/inlet on same end opposite.

Measures 1270(L) x 400(W) x 210(H)mm


 

We also have many shapes and sizes of Water Bladders.